HIGH SPEED SEAMER LINE FEATURES:
	•		8" x 10" minimum size through transfer, smaller sizes optional down to 3.5"
			GLASSLINE seamers are available with up to two spindles in any combination of seaming and dubbing. Pencil edge grinding can also be achieved with this machine. Part sizes up to 144 inches can be accommodated. The machines shown are used for seaming which can be done with shaped diamond wheels. Three different 90-degree transfers are available including the drop type; part size and throughout determine type required.
FEATURES:
	•		Belt drive lighweight spindles may be locked for size control or floated with pressure supplied by air cylinders
	•		Oil mist lubricated spindles
	•		Hydraulic feed controls minimize trailing edge tailing
	•		Reinforced upper and lower timing belts through part driven section
	•		Hold down system utilizes bladder to provide equal full length pressure on part
	•		PLC controls sequencing through the line
OPTIONS:
	•		In line squaring device
	•		Automatic part referencing for #1 or #2 seamer
	•		Integrated dubbing stations provides equal dub on leading and trailing edged
	•		Dual lead screws
	•		Digital size display
	•		Part centering
	•		Load tables
	•		Pinch roll automatic feeders
	•		High speed loaders & unloaders
	•		Edge deletion
	•		Automatic width set-up
	•		Cascading changeover
For more information contact us at the GLASSLINE COMPANY or fill out the contact request form: