DOUBLE EDGER LINE FEATURES:
	•		8" x 10" minimum size through transfer, smaller sizes optional down to 3.5"
			GLASSLINE double edgers are available with up to five spindles in any combination of grinding, polishing, edge deletion, grooving and dubbing. Part sizes up to 144 inches can be accommodated. The machine shown is used for pencil edging although flat and seaming can be done with shaped diamond wheels. Three different 90-degree transfers are available including the drop type; part size and throughout determine type required. Cup wheel machines and slat grinders down to under 3 inches part width are also available.
FEATURES:
	•		Direct drive spindles may be locked for size control or floated with pressure supplied by air cylinders
	•		Oil mist lubricated spindles
	•		Hydraulic feed controls minimize trailing edge tailing
	•		Reinforced upper and lower timing belts through part conveyor section
	•		Hold down system utilizes bladder to provide equal full length pressure on part
	•		PLC controls sequencing through the line
OPTIONS:
	•		In line squaring device
	•		Automatic part referencing for #1 or #2 edgers
	•		Integrated dubbing stations provides equal dub on leading and trailing edged
	•		Dual lead screws
	•		Digital size display
	•		Part centering
	•		Load tables
	•		Pinch roll automatic feeders
	•		High speed loaders & unloaders
	•		Edge deletion, grooving
	•		Automatic width set-up
	•		Cascading changeover
For more information contact us at the GLASSLINE COMPANY or fill out the contact request form: